WAGNER FINISH CONTROL 4000 18V Manual De Instrucciones página 25

FinishControl 4000 18V
4
TECHNICAL DATA*
Rechargeable battery
(ProCore 18 V, 4.0 Ah):
Charger (GAL 18V-40):
Input voltage
Output voltage
Charging current
Protection Class (charger):
Charging time (Rechargeable
battery 18 V, 4.0 Ah):
Sound pressure level:**
Uncertainty K:
Sound pressure output:**
Uncertainty K:
Oscillation level:
Uncertainty K:
Weight:
Rechargeable battery
Total
* When using a ProCore 18 V, 4.0 Ah battery and a charger
GAL 18V-40
** The acoustic emission value was ascertained in accord-
ance with EN 62841-1
5
INTRODUCTION TO SPRAYING
USING THE XVLP PROCEDURE
XVLP (Extra Volume Low Pressure) is a low pressure spraying
technique, which works with a high volume of air and a low air
pressure. The greatest advantage of this spraying technique
is the low paint mist formation. This reduces the amount re-
quired to cover the object to a minimum.
As opposed to conventional application of coatings, this
method achieves a highly economical and perfect surface
quality and is, at the same time, environmentally friendly.
Function description
The paint spraying system consists of a motor-operated tur-
bo-blower, which provides the spray gun with atomisation air
through an air hose.
In the spray gun, a part of the atomisation air is used to pres-
surise the container. This pressure causes the coating material
to be fed through the uptake pipe to the nozzle where it is
atomised by the rest of the atomisation air.
All settings necessary for operation (e.g. material volume) can
be conveniently made, directly on the gun.
Field of application
The FC 4000 is designed for smaller to medium-sized projects,
i.e. for surfaces of a maximum of 50 m².
TECHNICAL DATA/ INTRODUCTION/ PREPARING THE COATING MATERIAL
Li-Ion, 18 V , 4.0 Ah
220-240 V , 50-60 Hz;
~
10.8-18 V
4000 mA
/ II
approx. 48 min (80%),
65 min (100%)
85 dB (A)
3 dB (A)
93 dB (A)
3 dB (A)
<2.5 m/s²
1.5 m/s²
0.55 kg
1.84 kg
6
COATING MATERIAL
6.1 COATING MATERIALS SUITABLE FOR USE
Solvent-based and water-soluble lacquer paints
Mordants, glazes, impregnations, oils, clear varnishes, syn-
thetic enamels, coloured paints, alkyd resin varnishes, prim-
ers, radiator paints, hammer effect enamels, anti-rust paints,
special-effect paints, textured paints
6.2 COATING MATERIALS NOT SUITABLE FOR USE
Materials that contain highly abrasive components, facade
paint, caustic solutions and acidic coating substances.
Flammable materials.
6.3 COATING MATERIALS THAT CAN ONLY BE
PROCESSED WITH RELEVANT SPRAY
ATTACHMENT (ACCESSORIES)
Interior wall paint (dispersions and latex paint)
6.4 PREPARING THE COATING MATERIAL
Observe the manufacturer's instructions for the
use of the coating material on the paint tin or on
the technical instruction sheet.
Coating material purity:
An absolute pre-condition for the trouble-free operation of
the fine-spray system is that the coating material is uncontam-
inated. If you have doubts as to the purity of the coating mate-
rial, we recommend that you first filter it through a fine sieve.
Processing the coating material with the FineSpray spray
attachment (brown) / StandardSpray spray attachment
(yellow)
Coating Material Processing
Solvent-based lac- observe manufac-
quer paints turer's instructions
Water-soluble lac- observe manufac-
quer paints turer's instructions
Mordants, glazes, im- undiluted
pregnations, oils
Clear varnishes, syn- observe manufac-
thetic enamels, col- turer's instructions
oured paints, alkyd
resin varnishes
Primers, radiator observe manufac-
paints, hammer ef- turer's instructions
fect enamels
EN
Comments
FineSpray spray
attachment
(brown) recom-
mended
19