Idiomas disponibles
Idiomas disponibles
EN
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
•
When operating the product outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
•
If operating the product in a damp location
is unavoidable, use a Residual Current Device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
•
Do not clean the product with water from a hose
or a pressure washer. Water entering a product will
increase the risk of electric shock.
•
Do not operate the product in rain. Water entering
a product will increase the risk of electric shock.
2.2.3 PERSONAL SAFETY
•
Stay alert, watch what you are doing and use
common sense when operating the product. Do
not use the product while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating the product
may result in serious personal injury.
•
Use personal protective equipment. Always wear
eye protection. Protective equipment such as a
dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
•
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to
power source and/or Battery pack, picking up
or carrying the product. Carrying power tools with
your finger on the switch or energizing power tools
that have the switch on invites accidents.
•
Remove any adjusting key or wrench before
turning the product on. A wrench or a key left
attached to a rotating part of the product may result
in personal injury.
•
Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the product in unexpected situations.
•
Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
•
If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
•
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury within a fraction of a
second.
2.2.4 PRODUCT USE AND CARE
•
Do not force the product. Use the correct
product for your application. The correct product
English
will do the job better and safer at the rate for which it
was designed.
•
Do not use the product if the switch does not
turn it on and off. Any product that cannot be
controlled with the switch is dangerous and must be
repaired.
•
Disconnect the plug from the power source
and/or remove the BATTERY pack, if
detachable, from the product before making any
adjustments, changing accessories, or storing
the product. Such preventive safety measures
reduce the risk of starting the product accidentally.
•
Store an idle product out of the reach of children
and do not allow persons unfamiliar with the
product or these instructions to operate the
product. A product is dangerous in the hands of
untrained users.
•
Maintain the product and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the operation of the product. If
damaged, have the product repaired before use.
Many accidents are caused by poorly maintained
product.
•
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
•
Use the product, accessories and tool bits etc.
in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use of the product for
operations different from those intended could result
in a hazardous situation.
•
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe handling
and control of the product in unexpected situations.
•
Remove the key or disable the product when
leaving the product unattended. The product is
dangerous to untrained users.
2.2.5 BATTERY TOOL USE AND CARE
•
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
•
Use the product only with specifically
designated battery backs. Use of any other battery
packs may create a risk of injury and fire.
•
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or fire.
•
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
6
