Idiomas disponibles
Idiomas disponibles
EN
3. Lower the roll bar.
4. Install the clevis pins and R pins to secure the roll
bar down.
To raise the roll bar:
1. Raise the top roll bar into the raised position.
2. Insert the clevis pins through the roll bar.
3. Then install the R pins into the clevis pins.
7.1.3 REAR TRAILER HITCH
Towing loads can be risky, especially on slopes.
•
Max total weight (trailer & load) should not exceed
300 lbs (136 kg).
•
Max tongue weight should be under 45 lbs (20.2
kg).
•
Avoid slopes over 10 degrees.
•
Slow down and be cautious on slopes.
•
Do not tow with a grass catcher.
Secure the trailer using the appropriate clevis pin (1)
and R pin (2).
WARNING
English
1
Excessive towed loads affect traction and control on
slopes. Lighten the load on slopes. Surface conditions
impact traction and stability. Wet or slippery surfaces
reduce traction, impacting stopping and turning.
Evaluate the terrain before using the unit and trailer,
avoiding slopes steeper than 10 degrees.
7.2
START THE PRODUCT
Note: Clear the area of bystanders before operating
the mower. If anyone enters the mowing area, stop
immediately and do not return to mowing until the
bystanders leave the area.
1. Get on the mower from the footrest on the left side
of the deck. Accessing the operator's seat from
other directions may cause damage to the mower
or increase the risk of injury to the operator.
2. Raise the mower deck to its highest position. See
Foot Pedal & Deck Height Adjustment Pin section
under Features and Controls. (Reference 5.1.5)
3. Insert the start key and turn to ON position.
4. Pull steering control levers inward to the NEUTRAL
position.
20
2
