Idiomas disponibles
Idiomas disponibles
5. Pull up PTO switch to engage blades for mowing.
Note: Engage blades only after steering control
levers are moved into the NEUTRAL position.
NEVER engage blades when mowing!
6. Push steering control levers forward for forward
motion and pull for reverse motion.
Note: Use caution when crossing over gravel paths
or driveways. Before crossing, disengage the blades
and raise the cutting deck to the highest position to
minimize the possibility of ricochet. Drive slowly to
avoid loss of traction and control.
Note: Do not attempt to change the direction of
operation while the mower is in motion. Always
come to a complete stop before changing the
mower direction.
Note: Steering control levers will spring back
towards the neutral position if released from behind,
but it is important to manually guide them to reach
the neutral position.
7.3
STOP THE PRODUCT
DANGER
Never make sudden stops or reverse direction,
especially when maneuvering on a slope. The steering
is designed for sensitive response. Rapid movement
of the steering control levers in either direction could
result in a reaction of the product that can cause
serious injury.
1. Drive the mower to a flat, level surface and return
the steering control levers to the NEUTRAL position
to stop the mower's movement. Push the steering
control levers outward to engage the parking brake.
2. Push down PTO switch to disengage the blades.
3. Rotate start key to the OFF position. Remove the
start key.
English
7.4
DIGITAL DISPLAY SCREEN
The function of the digital display, located on the control
panel, is to provide electrical system information to the
operator. It gives detailed information in the form of
patterns, codes and numbers.
1 2
10
7
#
Name
1
2
3
Total: 350h Working time
4
5
6
7
8
9
10
21
3
4 5 6
9
Function
Error warning. Check the error code.
ETO device is under operation. If it
blinks, the device is connected.
User presence needed to operate.
LED Lights activated.
The parking brake is engaged. If the
icon is blinking, neutral bypass func-
tion is activated.
Blade speed
Drive speed
Battery level
4G GPS Signal
EN
8
