Idiomas disponibles
Idiomas disponibles
■
When cutting long grass, reduce walking speed to allow for
more effective cutting and a proper discharge of the clippings.
■
A higher cutting height extends the run time of the
battery pack.
TRANSPORTATION AND STORAGE
■
Turn off the product, and remove the isolator key and
the battery pack. Make sure that all moving parts have
come to a complete stop. Allow the product to cool down
before storing or transporting.
■
Remove all foreign materials from the product. Store the
product in a cool, dry, and well-ventilated place that is
inaccessible to children. Keep the product away from
corrosive agents, such as garden chemicals and de-
icing salts. Do not store the product outdoors.
■
Store the product in a location where the ambient
temperature is between 0°C and 40°C.
■
Use extreme caution when lifting or tilting the product for
maintenance, cleaning, storage, or transportation. The
blade is sharp; keep all body parts away from the blade
while it is exposed.
■
For transportation in vehicles, remove the isolator key
and the battery pack, and secure the product against
movement or falling to prevent injury to persons or
damage to the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
MAINTENANCE
■
Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
■
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. Have the product serviced by an authorised
service centre only.
■
You may make adjustments and repairs described in this
manual. For other repairs, have the product serviced by
an authorised service centre only.
■
Turn off the product, and remove the isolator key and the
battery pack. Make sure that all moving parts have come
to a complete stop before any cleaning or maintenance
task.
■
Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure that the product is in safe
working condition.
6
■
After each use, clean the plastic parts with a soft, dry
cloth. Any part that is damaged should be properly
repaired or replaced by an authorised service centre.
■
Replace damaged blades and bolts in sets to preserve
balance.
■
Be careful during adjustment of the product to prevent
entrapment of the fingers between moving blades and
fixed parts of the product.
■
The blade on the product is sharp. Use extreme caution,
and wear heavy-duty gloves when fitting, replacing,
cleaning, or checking bolt security.
■
The blade bolts must be adequately tightened. See the
manufacturer's recommendations for blade bolt torque,
which can be found in the product specification table in
this manual.
■
Be aware that even though the power source is turned
off, the blades can still be moved.
CLEARING BLOCKAGES
■
Turn off the product, and remove the isolator key and the
battery pack. Make sure that all moving parts have come
to a complete stop.
■
Always wear heavy-duty gloves when checking or
clearing a blockage. The blades are sharp, and the
blockage itself could be a sharp object.
■
Remove the grass catcher. Check and carefully clear the
grass catcher for obstructions.
■
Check the grass discharge chute, and carefully clear
blockages.
■
Turn the product on its side. Check its underside and the
area around the blade. Carefully remove any blockages.
Remember that the blade may move during cleaning.
KNOW YOUR PRODUCT
See page 131.
1. Speed adjustment slider (RY36LMXSP46A only)
2. Self-propel lever (RY36LMXSP46A only)
3. Interface board
4. Start button
5. On/Off lever
6. Telescopic handle
7. Operator's manual
8. Handle lock lever
9. Isolator key
10. Grass catcher full indicator
11. Height adjustment release key
12. Quick-release fastener
13. Grass catcher
14. Battery door
15. Blade lock
16. Rear wheel
17. Front wheel
18. Mulching plug
19. Battery pack
20. Charger
