Idiomas disponibles
Idiomas disponibles
Naturally enough, it is essential that a dirty
workpiece be cleaned thoroughly prior to poli-
shing! Use of sandpaper is helpful here. Approp-
riate sanding sheets with a touch fastener layer
are available in our range (www.proxxon.com).
Polishing:
Warning!
Please ensure that the polishing tool is in a per-
fect condition and not worn or damaged. Parts
can break off and fl y about if polishing tools are
worn or damaged. This could result in injuries.
Please note:
Never work without polishing agent! Please
note that the ingredients of different polishing
agents play a decisive part in achieving the po-
lishing effect, not the mechanical action of the
polishing tool!
Therefore, the choice of polishing agent, whe-
ther emulsion, wax or paste, is decisive if the
desired result is to be achieved. Please ensure
that the correct agent is selected for the material
to be polished and the respective working stage.
It is recommended to apply the polishing agent
with the enclosed yellow polishing sponge. This
procedure should be realised at as low a speed
as possible to avoid the polishing agent splas-
hing about.
Following application of the polishing agent to
the surface to be polished, the polishing pro-
cess can be continued as required with the
polishing felt disc and polishing hood.
The complete procedure should, depending on
requirements, be repeated until the desired re-
sult is achieved. Finally, the workpiece should
be cleaned of residual polishing agent using the
microfi bre cloth.
8 Accessories
Naturally enough, all the items described above
are also available as accessories from Proxxon.
For more detailed information on accessories,
please request our device catalogue from the
address specifi ed on the last page in the war-
ranty information.
Please note in general:
Proxxon bits and cutters have been designed
to work with our machines, which makes them
optimal for their use.
We will not assume any liability whatsoever
for the safe and proper function of our devices
when using third-party bits and cutters!
Service note
Please note: The mains power input for the
charger may only be replaced by our Proxxon
Service Department or a qualifi ed specialist!
9 Care and maintenance
Caution!
Remove the battery from device before any
assembly, adjustment, maintenance measure
or repair!
The device is broadly maintenance-free. For a
long service life, you should clean your unit af-
ter every use with a soft cloth or brush.
The exterior of the housing can be cleaned
with a soft, possibly damp cloth. A mild soap
or other suitable cleaning agent may be used
during this. Solvents or cleaning agents con-
taining alcohol (e.g. petrol, cleaning alcohols
etc.) should be avoided, since these can attack
plastic casings. In any event, make absolutely
certain that no liquids penetrate into the interior
of the device.
10 Disposal
Please do not dispose of this machine in
household refuse! The device contains reusable
materials which can be recycled. If you have
any questions about this, please contact your
local disposal company or other appropriate
local facilities.
- 21 -
