2. To select the language of the display, press
and hold until the required language appears, then press
the flag corresponding to the language.
Now follow the instructions indicated on the display of the
appliance:
3. Remove the water tank (A17) (fig. 2), fill to the MAX line
(marked on the tank) with fresh water (fig. 3), then return
it to its position (fig. 4);
3 2
4. Make sure the hot water spout (D6) is attached to the con-
nection nozzle (A8) (fig. 5) and place a container of at least
200 ml capacity under the coffee spouts (A9) and hot water
spout (fig. 6);
5. Press
to confirm. The appliance delivers
water from the spout.
6. At the end of delivery, the appliance proceeds with heating
by performing a rinse cycle, delivering hot water from the
coffee spouts.
The coffee machine is now ready for normal use.
Please note!
•
The first time the appliance is used, it will be necessary to
make 4-5 cappuccinos before the drink in the cup tastes as
it should. It is normal to hear the noise of boiling water at
first: the noise will become less with subsequent use.
•
To improve the performance of your appliance, we recom-
mend installing a water softener filter (D4) as described
in section "15. Water softener filter". If your model is not
provided with a filter, you can request one from De'Longhi
customer services.
3
5. TURNING THE APPLIANCE ON
Please note! Models with main switch only «A22» Before turn-
ing the appliance on, make sure the main switch on the back of
the appliance is pressed (fig. 1).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is not ready for use until the cycle has been completed.
1. To turn the appliance on, press the
7): the preheat sequence now starts.
2. Once the appliance has heated up it performs a rinse cycle,
during which hot water is delivered from the coffee spout
(A9); in addition to heating up the boiler, this also heats
the internal circuits by circulating hot water.
The appliance is ready for use when the main screen (home-
page) appears.
6. TURNING THE APPLIANCE OFF
Whenever the machine is turned off after being used to make
coffee, it performs an automatic rinse cycle.
Danger of scalding!
During rinsing, a little hot water flows from the coffee spouts
(A9) . Take care to avoid contact with splashes of water. To
avoid the need for frequent emptying of the drip tray , place a
container under the spouts to collect the rinse water.
8
4
6
button (A7)(fig.
5
7