Idiomas disponibles
Idiomas disponibles
2.2 Troubleshooting and repairs
In the event of problems, first try and resolve them by reading
the information given in sections "17. Displayed messages" and
"18. Troubleshooting".
If this does not resolve the problem or you require further in-
formation, you should consult Customer Services by calling the
number given on the annexed "Customer Service" sheet.
If your country is not among those listed on the sheet, call the
number given in the guarantee. If repairs are required, contact
De'Longhi customer services only. The addresses are given in the
guarantee certificate provided with the machine.
3. DESCRIPTION
3.1 Description of the appliance
A1. Beans container lid
A2. Pre-ground coffee funnel lid
A3. Beans container
A4. Pre-ground coffee funnel
A5. Grinding adjustment dial
A6. Cup shelf
A7.
button: to turn the appliance on and off (standby)
A8. Hot water/steam connection nozzle
A9. Coffee spouts (adjustable height)
A10. Condensate tray
A11. Coffee grounds container
A12. Cup tray
A13. Drip tray water level indicator
A14. Drip tray grille
A15. Drip tray
A16. Water tank lid
A17. Water tank
A18. Water softener filter housing
A19. Infuser door
A20. Infuser
A21. Power cord
A22. Main switch (certain models only)
3.2 Description of homepage (main screen)
3 - B)
B1. Energy Saving active symbol
B2. Intensity selected
B3. Directly selected drinks
B4. Scroll arrow
B5. Quantity selected
B6. Descale alarm
B7. Milk carafe cleaning alarm
B8. Spent filter alarm
3.3 Description of control panel
C1. Coffee drinks menu
C2. Milk drinks menu
C3.
C4.
C5.
C6.
3.4 Description of accessories
D1. "Total Hardness Test" strip
D2. Pre-ground coffee measure
D3. Descaler (certain models only)
D4. Water softener filter (certain models only)
D5. Cleaning brush (certain models only)
(page 2 - A)
D6. Hot water spout
3.5 Description of milk carafe
E1. Froth adjustment and CLEAN dial
E2. Milk carafe lid
E3. Milk carafe
E4. Milk intake tube
E5. Frothed milk spout (adjustable)
4. SETTING UP THE APPLIANCE
Please note!
•
•
•
1. Plug the appliance into the mains socket and, in the case of
(page
(page 3 - C)
7
: appliance settings menu
: profile selection menu
: drink intensity selection
: drink quantity selection
The first time you use the machine, the water circuit is
empty and the appliance could be very noisy. The noise
becomes less as the circuit fills.
Coffee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of coffee
in the mill. The machine is, however, guaranteed new.
You should customize water hardness as soon as possible
following the instructions in section "14. Setting water
hardness".
models with main switch «A22», make sure it is set to the
I position "fig. 1".
(page 3 - D)
(page 3 - E)
1
