EGO PRO X HTX5300-PA Traducción De Las Instrucciones Originales página 11

Cortasetos inalámbrico de 56 voltios de iones de litio con tubo articulado
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
CHANGING SPEED MODE (FIG. K)
The machine features three speed modes. Each time the
speed mode switch is pressed, the speed will change.
The speed indicator will display the active speed status:
One light for low speed, two lights for medium speed,
three lights for high speed. The low speed mode provides
better control of the machine and longer operating time
per charge.
NOTICE:
The speed mode can be set before the machine
is turned on OR during operation.
When the machine is re-started after a break, the speed
mode will return to the previous speed.
Indicator Lights
Solid green
Flashing green
Solid red
Battery-status
Flashing red
indicator
Solid orange
Flashing red/
green alternately
Solid green
Speed indicator
(the illustrates
Solid orange
show the high
speed)
Flashing orange
56 VOLT LITHIUM-ION CORDLESS ARTICULATING POLE HEDGE TRIMMER— HTX5300-PA
K-1 Speed Indicator
K-2 Bluetooth
Indicator K-4
®
BATTERY-STATUS INDICATOR AND SPEED
INDICATOR (FIG. K)
The battery-status indicator shows the charge level and
the working status of the battery pack, and the speed
indicator shows the working status of the machine as
shown in the chart below. The battery-status indicator
and the speed indicator will illuminate when the machine
is started OR the speed mode button is pressed.
Meaning
Battery charge level of 20% to 100%
Battery charge level of 10% to 20%
Battery charge level of less than 10%
The battery pack is nearly depleted and needs
to be charged immediately.
The battery pack is overheated. Cool the battery
pack until the temperature drops below 67°C.
See " Battery High-temperature Protection
" below
The battery pack electronics error. Replace
the battery pack or contact EGO customer
service center. See " Battery Electronics Error
Protection " below.
The machine is working properly.
The machine is overheated. Cool the machine
until the temperature drops below 80°C. See "
Machine High-temperature Protection " below.
The machine is overloaded. See "Machine
Overload Protection" below.
K-3 Speed Mode Button
Battery-status
Indicator
11
EN
loading