Pentair PSP Serie Guia De Instalacion página 3

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
Customer service
HERENTALS, BELGIUM (8:30 A.M. to 4:30 P.M.) CET
Website: www.pentairpooleurope.com
Declaration of Conformity
Standards used for showing compliance with the essential requirements in the specified directives EN60335-1 and EN60335-2-41.
We declare, under our sole responsibility, that the product identified in this declaration, and to which this declaration relates, are
in conformity with the protection requirements of Council Directive 2006/95/EC
The manufacturer, Pentair has the right to modify the products without previous notice
for as far as their characteristics are not really changed by this.
© 2013 Pentair. All rights reserved This document is subject to change without notice. Trademarks and disclaimers: Pentair® is a
trademark and/or registered trademark of Pentair Ltd. and/or its affiliated companies. Unless noted, names and brands of oth-
ers that may be used in this document are not used to indicate an affilitation or endorsement between the proprietors of these
names and brands and Pentair. Those names and brands may be the trademarks of those parties or others.
THESE OPERATING INSTRUCTIONS CONTAIN IMPORTANT INFORMATION ON THE SAFE, PROPER AND ECONOMICAL OPERA-
TION OF THE SWIMMING POOL PUMP. STRICT OBSERVATION OF THE OPERATING INSTRUCTIONS WILL HELP TO AVOID DAN-
GERS, REDUCE REPAIR COSTS AND SHUTDOWN TIMES AND INCREASE THE RELIABILITY AND WORKING LIFE OF THE PRODUCT.
Consumer Information and Safety
The PSP Series pumps are designed and manufactured to provide many years of safe and reliable service when installed, oper-
ated and maintained according to the information in this manual. Throughout the manual, safety warnings and cautions are
identified by the "
" symbol. Be sure to read and comply with all of the warnings and cautions.
DANGER — Risk of electrical shock or electrocution.
This pool pump must be installed by a licensed or certified electrician or a qualified pool serviceman. in accordance all applica-
ble local codes and ordinances. Improper installation will create an electrical hazard which could result in death or serious injury
to pool users, installers, or others due to electrical shock, and may also cause damage to property.
Always disconnect power to the pool pump at the circuit breaker before servicing the pump. Ensure that the disconnected cir-
cuit is locked out or properly tagged so that it cannot be switched on while you are working on the pump. Failure to do so could
result in serious injury or death to serviceman, pool users or others due to electric shock.
WARNING — Do not operate the pump until you have read and understand clearly all the operating instructions and
warning messages for all equipment that is a part of the pool circulating system. The following instructions are intended as a
guide for initially operating the pump in a general pool installation, however each installation may have unique conditions
where the starting procedure could be different. Failure to follow all operating instructions and warning messages can result in
property damage or severe personal injury or death.
To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
WARNING —Never exceed the maximum operating pressure or temperature limits of the system components.
Due to the potential risk that can be involved it is recommended that the pressure test be kept to the minimum time required
by the local code. Do not allow people to work around the system when the circulation system is under pressure test. Post ap-
propriate warning signs and establish a barrier around the pressurized equipment. If the equipment is located in an equipment
room,lock the door and post a warning sign.
Never attempt to adjust any closures or lids or attempt to remove or tighten bolts when the system is pressurized. These actions
can result in a separation or failure of system components. This instantaneous release of energy can cause components to be ac-
celerated to high velocities and to travel distances of 30 meters or more. These components could cause severe personal injury
or death if they were to strike a person.
This manual should be kept in a safe placed and always available to the qualified operating and maintenance personnel respon-
sible for the safe operation and maintenance of the pumps.
Clean your filter periodically.
G-INSB-PSP (REV 02/2013)
IMPORTANT SAFETY PRECAUTIONS
3
Tabla de contenido
loading

Este manual también es adecuado para:

Psp 3.5 hpPsp 4.5 hpPsp 5.5 hpPsp 7.5 hpPsp 10 hp

Tabla de contenido