Idiomas disponibles
Idiomas disponibles
GB
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
BLADE SAWING MACHINE (JIGSAW)
52G064
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
• Whenever working tool can hit hidden electric wires or its own
power cord during operation, hold the power tool only by
insulated surfaces of the handle. Contact with power supply line
may transfer its voltage to metal parts of the power tool and cause
electric shock.
• Keep hands at safe distance from the cutting area. Do not put
them under processed piece. Contact with blade may cause injury.
• Switch off the jigsaw after work. Remove blade from processed
piece only when it is at standstill. This way you can avoid recoil and
it is possible to safely put the power tool away.
• Use only undamaged blades in good technical condition. Bent, blunt
blades may break, additionally may affect cutting line and cause recoil.
• Certain wood and metal types may be dangerous to health
and cause allergic reactions, respiratory tract illness or be
carcinogenic.
– Use dust masks when cutting to protect your respiratory system
against produced dust.
– Use dust extraction system when cutting wood.
– Always provide good ventilation of your workplace.
• Do not cut water system pipes with the jigsaw. Cutting a pipe may
cause material damages or electric shock.
• Carefully check the processed material before cutting to eliminate
possibility of cutting nails, bolts, or other hard objects.
• Do not cut objects thicker than allowed in technical specification for
a given material.
• Hold the jigsaw in a closed hand.
• Ensure the jigsaw does not have contact with the material before
pressing the switch.
• Do not touch moving parts with your hand.
• Do not put away the jigsaw until it stops moving. Do not switch the
jigsaw on when not holding it.
• Do not touch the blade or processed material immediately after
the work has been finished. Those elements may be hot and may
cause burns.
• When you see unusual behaviour of the tool or hear strange noises,
immediately switch off the tool and remove the plug from mains socket.
• To ensure proper cooling keep ventilation holes in the jigsaw body
uncovered.
• Before connecting the jigsaw to mains socket make sure the supply
voltage matches the voltage on the rating plate of the tool.
• Each time before connecting the jigsaw check the power cord, in case
of damage hand over to authorized workshop for repair.
• Power cord of the jigsaw always must be on the safe side, where there
is no danger of accidental damage by operating power tool.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is always a
small risk of injuries at work.
Explanation of used symbols :
1
2
4
5
3
6
1. Read instruction manual, observe warnings and safety conditions
therein.
2. Device with class II insulation.
3. Use personal protection measures (protective goggles, earmuff
protectors, anti-dust mask)
4. Disconnect the power cord before starting maintenance or operation.
5. Protect against rain.
6. Keep the tool away from children.
CONSTRUCTION AND USE
Jigsaw is a hand-operated power tool with insulation class II. It is driven by
a single-phase commutator motor. The tool is designed for making straight,
coarse cuts, curved cuts and holes in wood, wood-based materials, plastics
and metals (provided that appropriate blade is used).
Range of use covers repair and building works, and any work from the range
of individual, amateur activities (tinkering).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
1. Switch
2. Switch lock button
3. Adaptor
4. Dust extraction outlet
5. Footplate
6. Guiding roller
7. Blade holder
8. Guard
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Hexagonal key
2. Dust extraction adaptor
PREPARATION FOR OPERATION
BLADE INSTALLATION
Disconnect the power tool from power supply.
Use the hexagonal key and loosen the blade holder (7) fixing screws
(fig. A).
• Slide blade to the blade holder (7) to mechanical stop (blade teeth
should face forward).
• Tighten the fixing screws with the hex key (fig. A).
Ensure the blade is properly fitted in the guide roller (6) (fig. A). Blade
removal is similar to installation, only the sequence of actions is reversed.
Use blades suitable for U or T shank holder mechanism, as shown on fig. C.
DUST EXTRACTION
To improve dust extraction from processed material surface, the jigsaw
is equipped with own dust blow-off system, which cleans the surface
being cut. Additionally, it is possible to attach external dust extraction
system to the adaptor.
• Slide adaptor (3) into the dust extraction outlet (4) and turn counter-
clockwise to secure (fig. D).
• Attach suction hose of the dust extraction system to the adaptor (3).
Make sure the connection is tight.
OPERATION / SETTINGS
SWITCHING ON / SWITCHING OFF
Before connecting the jigsaw to a power supply always check that
power supply voltage matches rated voltage on the label fixed on
the power tool.
Switching on – press the switch button (1) and hold in this position.
9
- 1 pce
- 1 pce
