Idiomas disponibles
Idiomas disponibles
f. Connect the power adapter with the system. DO NOT put the plug in the socket yet.
g. Check if the system is installed properly, and turn on
the three-way ball valve.
V. Using the system
1. Before the �rst-time use
a. Connect the system with power. You will hear a beep, and all indicators will light up for
3 seconds. The system will enter into the auto-�ush mode. Wipe all the joints and
connections with tissue to check if there is leakage. If the tissue stays dry, it means the
system is installed properly. If there is no further operation in 10 seconds after the
auto-�ush, the system will turn into standby mode.
Puri�ed water outlet
Water inlet
（1）
（2）
10
Drain outlet
Filter water outlet
Quick connector clip
Hot
Cold
