Measuring bioimpedance
Network functions
Compatibility
3
SAFETY INFORMATION
3.1
Safety information in these instructions for use
108 • seca 555/554/552; seca 550/549; seca 257/256
The
measuring rod records height by means of ultrasound. The
seca 257/256
patient is guided through the measurement using configurable voice output.
Bioimpedance is measured by the 8-point method. A low alternating current is
introduced via the foot electrodes of the scale (
) and via hand electrodes (BIA handrail
seca mBCA 552
). A bioimpedance measurement can only be started when the
seca mBCA 549
weight and height of the patient have been recorded on the device.
bioimpedance measured results can be shown on the multifunctional display
No
of the device. The
seca analytics 125
bioimpedance measurement.
The device can be integrated into a PC network via a LAN interface or via WiFi in
order to set up a connection to the
The
seca analytics 125
software receives measurement data and processes
them in graphical form. The software thus assists the attending physician in ana-
lyzing measured results and making a diagnosis.
configuration software: Version 3.1 or higher, no downward
seca connect 103
compatibility
seca analytics 125
analysis software: Version 1.8 or higher
DANGER!
Used to identify an extremely hazardous situation. If you fail to take
note of this information, serious irreversible or fatal injuries will occur.
WARNING!
Used to identify an extremely hazardous situation. If you fail to take
note of this information, serious irreversible or fatal injuries may result.
CAUTION!
Used to identify a hazardous situation. If you fail to take note of this in-
formation, minor to moderate injuries may result.
NOTICE!
Used to identify possible incorrect usage of the device. If you fail to
take note of this information, you may damage the device, or the mea-
suring results may be incorrect.
NOTE
Includes additional information about use of the device.
seca mBCA 555/554
seca mBCA 550
software is required to analyze a
seca analytics 125
software.
,
/