Guidance And Manufacturer's Declaration - Electromagnetic Immunity - Acelity PREVENA INCISION Manual De Uso

Ocultar thumbs Ver también para PREVENA INCISION:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Guidance and manufacturer's declaration - electromagnetic immunity

The PREVENA™ 125 Therapy Unit is intended for use in the electromagnetic environment specified
below. The customer or user of the PREVENA™ 125 Therapy Unit should assure that it is used in such an
environment.
Immunity Test
Electrostatic discharge
(ESD)
IEC 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Voltage dips,
short interruptions and
voltage variations on
power supply input
lines
IEC 61000-4-11
Power frequency
(50Hz/60Hz)
magnetic field
IEC 61000-4-8
NOTE: U
is the a.c. mains voltage prior to application of the test level.
r
IEC 60601
Test Level
± 6 kV contact
± 8 kV air
± 2 kV
for power supply lines
± 1 kV
for input/output lines
± 1 kV line(s) to line(s)
± 2 kV line(s) to earth
<5 % U
r
(>95 % dip in U
)
r
for 0.5 cycle
40 % U
r
(60 % dip in U
)
r
for 5 cycles
70 % U
r
(30 % dip in U
)
r
for 25 cycles
<5 % U
r
(>95 % dip in U
)
r
for 5 cycles
3 A/ m
Compliance Level
Floors should be wood, concrete
± 8 kV contact
or ceramic tile. If floors are covered
± 15 kV air
with synthetic material, the relative
humidity should be at least 30%.
Not Applicable
Not Applicable
Not Applicable
Power frequency magnetic fields
30 A/m
should be at levels characteristic
of a typical location in a typical
50Hz or 60Hz
commercial or hospital environment.
23
Electromagnetic Environment
Guidance
Battery operated device
Battery operated device
Battery operated device

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Prevena peel & place

Tabla de contenido