Idiomas disponibles
Idiomas disponibles
Troubleshooting (cont.)
Symptom
Probable Cause
6.
Water leaking
A. Arm to
from the
valve inlet.
7.
An LED
A. The signal
signal emits
from the
sensor.
B. The signal
1108712-5-D
Recommended Action
• Turn off the water supply.
• Purge the valve.
control stop
• Disconnect the valve from the
seal is worn
or damaged.
control stop.
• Inspect the O-ring seal for the
control stop to inlet connection.
• Clean any debris from area.
• If the O-ring is cut or torn,
order a replacement.
• Reassemble the unit, taking
care to tighten the nut onto the
control stop.
• Batteries are low.
• Follow the directions of
repeats once
"Replace the Battery" section in
per second
when in
this guide.
range of the
sensor and
the valve
activates.
• Battery life has expired.
• Follow the directions of
repeats once
"Replace the Battery" section in
per second
when in
this guide.
range of the
sensor and
the valve
does not
activate.
22
Kohler Co.
