Lincar Betty 531 Manual Del Usuario - Mantenimiento página 50

MENU 02 (set clock)
With this Menu you can adjust the time and the date of the electronic card, the set date and
time will be utilized as reference for the activation of the switch ON/OFF programs
Keep ATTENTION to the regulation of Time and Date, these regulations influence the on/off
programs for the automatic lighting and turning off.
MENU 03 (set chrono)
Within this Menu you can set up the automatic cycles of switching ON/OFF you desire to
utilize. There are 3 different modalities you can use, even contemporaneously, but pay
attention to not overlap the programs.
PROGRAM DAY. The programs inserted in this section will be repeated every day of the
week in the same way (max 2 ON/OFF cycles)
PROGRAM WEEK. With the programs inserted in this section you can effect different
ON/OFF during the days of the week (max 4 ON/OFF cycles
PROGRAM WEEK-END. The programs inserted in this section will be repeated exclusively
on Saturday and Sunday (max 2 ON/OFF cycles).
MENU 04 (language)
Within this Menu you can change the language utilized by the control panel. There are 4
possibilities: ItalianEnglish German French
MENU 05 ( stand-by)
The appliance is preset to work in 2 (two) different modalities
st
1 Modality, -STAND-BY OFF- as prearranged by the factory.
Once the appliance has reached one of the selected temperature, it start the modulation and it
start to function at power 1 to low the combustible consumption. When the temperature low
under the selected value the equipment restore the functioning on setting power. (ex pot.3)
nd
2 Modality, -STAND-BY ON-.
Once the appliance has reached one of the selected temperature, it start the modulation , and it
start to function at power 1 to low the combustible consumption, if even at power 1 the
temperature increase again, the equipment start the off cycle and it will signal on display "
ECO-STOP STAND BY".
MENU 06 (BEEP SOUND)
Within this Menu you can select the modality BEEP (buzzer).
OFF, no sound ON, sound in case of alarm.
MENU 07 (FIRST LOADING)
With this Menu you can set the continuous fuel load, this operation can only be effected
when the appliance on the display is evidencing "OFF". This menu is utilized to fill the screw
feeder when the appliance is new or in case of emptying of the pellet container.
50/124
IT IT IT IT- - - - GB GB- - - - FR FR- - - - E E E E S S S S mod. 531 – 531N
GB GB FR FR