Basic Information; Control Panel Push Buttons Functions - Lincar Betty 531 Manual Del Usuario - Mantenimiento

BASIC INFORMATION

The stove must be light off and keep it cooling till the ambiance temperature before any
•
maintenance operation start.
Remove the plug after having light off the back switch.
•
Do not disconnect the stove from the electric connection or press the switch back
•
during the operation. This operation can block all engines of the equipment,
hampering the evacuation of fumes inside the stove.

CONTROL PANEL PUSH BUTTONS FUNCTIONS

The pellet stove is supplies by an electronic card installed inside it that receive the
•
functioning setting from control panel with a display to read the data.
Button 1 (P1)
- Pushed just one time, it enter in the function of change room
Temperature (to use P1 and P2 to change the value, P3 to exit)
- Inside the menu it Change the value on display
Button 2 (P2)
- Pushed just one time, it enter in the function of change / modify the
room Temperature ( to use P1 and P2 to change the value, P3 to exit)
- Inside the menu it Change the value on display
Button 3 (P3)
- Pushed just one time, it enter on Menù programming ( to use P5 and
P6 to scroll through menus, P3 to enter inside menù, P4 to exit).
- Inside the menu it confirm the data on display and it go on the following
enter.
Button 4 (P4)
- Keeping it pushed for some seconds Light/Turn Off the equipment.
- Inside the menu it need to return to previous position or to exit from
different menu
Button 5 (P5)
- Pushed just one time, it enter in the function of change the Equipment
Power ( to use P6 and P5 to modify the value, P3 to exit ).
- Inside the menu to scroll through menu.
Button 6 (P6)
- Pushed just one time, it enter in function of change Power Equipment
(to use P6 and P5 to change / modify the value, P3 to exit).
- Inside the menu serve to scroll through menus
45/124
IT IT IT IT- - - - GB GB- - - - FR FR- - - - E E E E S S S S mod. 531 – 531N
GB GB FR FR