Bemer Horse set Manual Del Usuario página 2

1
BE M E R Hor s e -Se t
velcro o c r e l v
female e a l m f e
BEMER Horse-Set – designed with the dimensions and
versatility to optimally reach all relevant areas of the body.
2
Neck Area Body Area
Recommended separation distances
Recommended separation distances between portable and mobile RF communications
equipment and the BEMER Horse-Set devices.
3
The BEMER Horse-Set products are intended for use in the electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the VET device can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the VET device as recommended below, according to
START
the maximum output power of the communication equipment.
now Rated maximum output
power of transmitter
(W)
0.01
0.1
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meter (m) can be
estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection
P1
from structures, objects and people.
Note 3: An additional factor of 10/3 is used in calculating the recommended separation distance to decrease the likelihood that
mobile/portable communications equipment could cause interference if it is inadvertently brought into patient areas.
Leg Area
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz 80 MHz to 800 MHz
d = 1.2 P d = 1.2 P
0.12 m 0.12 m
0.38 m 0.38 m
1 1.2 m 1.2 m
10 3.8 m 3.8 m
12 m 12 m
transmitter in watts (W) according to the transmitter manufacturer.
213
800 MHz to 2500 MHz
d = 2.3 P
0.23 m
0.73 m
2.3 m
7.3 m
23 m