Bemer Horse set Manual Del Usuario página 12

Signal controller
Explaining the signal controller
P2
P1
P3
Activation of the signal controller
1.5 sec. = On / Off
Starting the treatment
Shortly press the button = start
Display charging
status of signal
controller
3 Application programs:
P1 = low, P2 = medium, P3 = intense
Duration: P1 = 5 min., P2 = 10 min., P3 = 15 min.
The device cannot be used
while being charged!
If the first LED on the battery display lights up
orange, it means that the signal controller needs
to be charged.
Press any button (P1-P3) for 1.5 seconds
to switch on the signal controller.
If not in use, the signal controller automatically
switches off after 2 minutes.
To start an application, shortly press the button of the
selected program. As soon as the application starts,
the selected program LED will begin pulsating.
If you press any key for 1.5 seconds (P1-P3) during a
session, the application is terminated and the signal
controller is switched off (can only be used if signal
controller is activated).
14