Bemer Horse set Manual Del Usuario página 11

Idiomas disponibles

Fitting and adjusting the cuffs

Attaching the neck applicator

Each pair of cuffs in the BEMER Horse set consists of 2 cuffs

that can be used for the front or rear right, and for the front or

rear left respectively. Apply the cuffs to the horse's leg from

behind and fasten them with the 3 continuously adjustable

Velcro fasteners (controller always faces outwards).

NOTE: The cuff inlets can be taken out and washed. Refer to the

"Cleaning" section for more information.

The cuffs are constructed like a rail, which makes it easier to

attach and fasten them.

Open the cuff and place it in the desired position. Now close the

cuff carefully and secure it using the Velcro fasteners.

Please note that the controller must always face outwards.

The neck applicator is designed for horses of varying sizes. It is

placed around the horse's neck and secured via the five attachment

points.

The narrow, tapered end faces towards the horse's head.

The two laterally adjustable neck straps are attached to the base of

the horse's neck. Their length can be adjusted to match that of the

horse's neck.

The two narrow straps are attached to the head collar on each side

of the horse's head.

When using the BEMER therapy blanket at the same time, a fifth

withers strap connects the neckpiece to the blanket. The coil

arrangement is adapted to the anatomy of the horse's neck to

guarantee optimal treatment of the entire neck.

412300 423500 422200