Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual
risk factors. The operator should pay particular and
additional attention to these points in order to reduce
the risk of serious personal injury.
Injury to hearing – Wear suitable ear protection
and limit exposure.
Injury to sight – Wear protective eye shields or
goggles when using the product.
Injury caused by vibration – Limit exposure and
follow the instructions on risk reduction in this
manual.
Electric shock after contact with hidden wires –
Hold the product only by insulated surfaces.
Respiratory injury from dust created by operating
the product – Wear suitable protection depending
on type of dust.
Cordless drill driver
Article number
Voltage
Chuck
No load speed (drill mode)
Gear 1
Gear 2
Clutch (positions)
Maximum torque
Maximum drilling capacity in
wood
Maximum drilling capacity in
metal
Weight (According to EPTA
procedure 01/2014)
Weight - not incl. battery pack
Ambient operating temperature
for the tool and battery pack
Ambient storage temperature
for the tool and battery pack
Recommended ambient
charging temperature
Recommended battery type
Recommended charger
See page 3.
1. Keyless chuck
2. Torque adjustment ring
3. Gear selector
ABS 18 BASIC
4. Direction of rotation selector
5701 408 000
5. Trigger switch
18 V/DC
6. Handle, insulated gripping surface
7. LED light
1.5 - 13 mm
8. Battery pack
9. Belt clip
0-550 min
-1
0-1700 min
-1
16 + drill mode
The drill driver can be used for drilling into various
60 Nm
materials, including wood, metal, and plastics using a
40 mm
drill bit having a shank diameter of less than 13 mm.
The product can be used to drive and remove screws
and bolts using an appropriate bit.
13 mm
For damage caused by usage other than intended, the
user is responsible.
1.8 kg (4.0 ah) -
1.9 kg (5.0 ah)
1.2 kg
ALG 18/6 FAST
Know Your Product
Intended Use
Symbols
0 - 40°C
0 - 27°C
5 - 40°C
LI 18V/4 Ah
BASIC
LI 18V/5 Ah
BASIC
ALG 18/4
BASIC
19
