Kenmore 911.47692 Guía Para El Uso Y Cuidado página 30

CARE AND CLEANING
Removable Parts
For improved lighting inside the oven,
clean the glass cover frequently using
a wet cloth Caution: This should
only be done when the oven is
completely cool.
CLEANING MATERIALS
• Dishwashing detergent
• Warm water
° Scouring pad or soap-filled pad
Bump
Glass
RetainerS}
Live Collar
Glass
Cover
TO REMOVE THE COVER
Disconnect electrical power to the
oven at the main circuit breaker or
fuse box.
=
Grasp the glass cover and turn
1/4 turn counterclockwise until the
tabs of the glass cover clear the
grooves of the glass retainer.
REPLACE THE LIGHT BULB
Unscrew the light bulb and replace it
with a 40-watt appliance bulb..
TO REPLACE COVER
1. Place the tabs of the glass cover
into the grooves of the glass
retainer
2. Turn the glass cover 1/4 turn in the
clockwise direction
3. Reconnect the electrical power to
the oven
TO REMOVE
1. Pull the racks out to the stop lock
position.
2. Pull up the front of the rack and
slide under the bump off the rack
guide,
TO CLEAN
Clean with warm water and
detergent. For hard to remove stains,
gently scrub with a scouring pad or
a soap-filled pad. Rinse well. Gray
porcelain-coated oven racks may
be cleaned in the oven during the
self-clean cycle.
TO REPLACE
1. Place the raised back of the rack
onto the rack guides°
2. Lift the front of the rack until the
raised back slides under the bump
of the rack guides
3, Slide the rack all the way back
3O