Idiomas disponibles
Idiomas disponibles
CARE ANDCLEANING
Self-Cleaning Cycle
The Clean Cycle, including
cooldown
time, is automatically
set for 4 hours,
but you may change this from 3 hours
if oven is lightly soiled, up to 5 hours if
oven is heavily soiled.
1. Press the SELF CLEAN
pad. 4 hours will show in
the display.
2. If you want to change
the length of clean time,
press the NUMBER
pads.
3. Press the START pad.
After the cycle, you may notice some
white ash in the oven. Just wipe it up
with a damp cloth or sponge.
If white spots remain, scrub them
with a soap-filled
steel-wool
pad. Be
sure to rinse thoroughly.
These are
usually deposits
of salt that cannot
be removed
during the cycle.
if your oven is equipped
with
porcelain
oven racks, it will be
necessary
to grease the edges with a
light coating of vegetable
oil after the
clean cycle, This will help maintain
the ease of sliding the racks in and
out of the oven.
if for any reason you are not
satisfied
with the cleaning results,
just repeat the cycle.
Simply press the CLEAR/OFF
pad.
You will need to wait for the oven
temperature
to drop below the lock
temperature
(approx.
1 hour) before
attempting
to open the door. Locked
door will go out in the display.
1. Press the SELF CLEAN
pad.
1_
2. If you want to change
the length of clean time,
press the NUMBER
pads.
Press the DELAY
START TIME pad.
Press the NUMBER
pads to set the time you
prefer the clean cycle to
start.
5. Press the START pad.
27
