Idiomas disponibles
Idiomas disponibles
EN
PROBLEM
The machine does not turn
on when the key is turned.
The brush does not rotate.
Aspirator does not work.
The machine does not dry
well, leaving traces of water
on the floor.
No water comes out.
FRECCIA30 E 45_27lingue_2ed_09-2013.indd 12
TROUBLESHOOTING
CAUSE
Circuit switch to position "0".
Power cable disconnected.
Brush fuse blown.
Brush
rotation
enabling
switch not pressed.
Aspirator fuse blown.
Suction
unit
switch
pressed.
Recovery tank full.
Aspirator off.
Aspiration tube blocked.
Recovery tank full.
Dirty water filter clogged.
Squeegee
rubber
worn.
Tank empty.
Solenoid
valve
enabling
switch not pressed.
Tap turned off.
Filter blocked.
Solenoid valve does not
work.
EN-12
SOLUTION
Press the power switch.
Connect the cable.
Replace the fuse of the
brushes engine.
Press the switch.
Replace the fuse of the va-
cuum motor.
not
Press the switch.
Empty, wash and clean the
tank and the probes.
Start up the aspirator.
Check and if necessary
clean the aspiration tube
that connects the squeegee
to the recovery tank.
Empty the recovery tank.
Clean the filter.
blades
Replace or turn over the
squeegee rubber blades.
Fill the tank.
Press the switch.
Open the tap
Clean the filter.
Call the technical support
service.
30/09/13 14:36
