Kenmore 106 Serie Manual De Uso Y Cuidado página 23

Ocultar thumbs Ver también para 106 Serie:
Idiomas disponibles

Idiomas disponibles

6. Clean, wipe, and dry thoroughly.
7. Take out all removable parts, wrap them well, and tape
them together so they don't shift and rattle during the
move.
8. Depending on the model, raise the front of the
refrigerator so it rolls easier OR screw in the leveling
legs so they don't scrape the floor. See the "Door
Closing" section.
9. Tape the doors shut and the power cord to the
refrigerator cabinet.
When you get to your new home, put everything back
and refer to the "Installing Your Refrigerator" section for
preparation instructions. Also, if your refrigerator has an
automatic ice maker, remember to reconnect the water
supply to the refrigerator.
TROUBLESHOOTING
Try the solutions suggested here first in order to
avoid the cost of an unnecessary
service call.
Your refrigerator will not operate
The power supply cord is unplugged,
Firmly plug the cord into a live outlet with proper voltage.
A household fuse or circuit breaker has tripped.
Replace the fuse or reset the circuit.
The refrigerator control is turned to the "OFF"
position.
Refer to the "Setting the Controls" section.
The refrigerator
is defrosting.
Recheck to see if the refrigerator is operating in 30
minutes. Your refrigerator will regularly run an automatic
defrost cycle.
The lights do not work
' ':
The power supply cord is unplugged.
Firmly plug the cord into a live outlet with proper voltage.
A light bulb is loose in the socket.
Turn the refrigerator control to "OFF". Disconnect the
refrigerator from the electrical supply. Gently remove the
bulb and reinsert. Then reconnect the refrigerator to the
electrical supply and reset the refrigerator control.
A light bulb has burned out.
Replace with an appliance bulb of the same wattage,
size, and shape. See the "Changing the Light Bulbs"
section.
There is water in the defrost drain pan
The refrigerator
is defrosting.
The water will evaporate. It is normal for water to drip
into the defrost pan.
It is more humid than normal.
Expect that the water in the defrost pan will take longer
to evaporate. This is normal when it is hot or humid.
The motor seems to run too much
The room temperature is hotter than normal.
Expect the motor to run longer under warm conditions.
At normal room temperatures, expect your motor to run
about 40% to 80% of the time. Under warmer conditions,
expect it to run even more of the time.
A large amount of food has just been added to the
refrigerator,
Adding a large amount of food warms the refrigerator. It
is normal for the motor to run longer in order to cool the
refrigerator back down. See the "Food Storage Guide"
section.
23
loading