Kenmore 106 Serie Manual De Uso Y Cuidado página 19

Ocultar thumbs Ver también para 106 Serie:
Idiomas disponibles

Idiomas disponibles

some
s
You can control the amount of humidity in the moisture-
sealed crisper. Adjust the control to any setting between
LOW and HIGH.
LOW (open) lets moist air out of the crisper for best
storage of fruits and vegetables with skins•
HIGH (closed) keeps moist air in the crisper for best
storage of fresh, leafy vegetables•
Or"SIse COv<:,l!'
In order to prevent food items from falling behind your
crisper, some models have a crisper cover extension that
covers the gap between the back wall and the back side of
the crisper• You may want to remove the extension when
cleaning.
To remove the crisper cover extension:
1. Lift up on the front of the extension•
2. Pull it off of the supports.
To replace the crisper cover extension:
1. Fit it back onto the supports on the side walls•
2. Rest the front of the extension on the crisper cover•
The dell drawer provides a convenient place to store
raisins, nuts, spreads, and other small items at normal
refrigerator temperatures•
To remove the dell drawer:
1. Slide the dell drawer straight out to the stop•
2. Lift the front and slide the drawer out the rest of the
way.
Replace the dell drawer by sliding it back in fully past
the drawer stop.
The door rails may be removed for easier cleaning.
Snap-on Door Rails
To remove the rails:
1. Remove all items from the shelf•
2. Push in slightly on the front of the bracket while pulling
out on the inside tab.
3. Repeat these steps for the other end of the rail.
To replace the rails:
1. Line up the ends of the brackets with the buttons on the
sides of the door liner•
2. Firmly snap bracket and rail assembly onto the tabs
above the shelf as shown•
Drop-in Door Rails
To remove the rails:
1. Remove all items from the shelf•
2. Pull straight up on each end of the rail.
To replace the rails:
1. Slide the shelf rail into the slots on the door•
2. Push the rail straight down until it stops•
19
loading