Assembly Procedure
1. Assemble the Pedestal
Fix the bracket
screws
.
Securely tighten the screws.
While fixing the screws to the bracket, support
the bracket by hand to prevent it from falling.
(Tightening torque: 1.5 to 1.8 N•m)
2. Install the Display
Installation must be carried out by at least two people.
(1) Align the arrow on the back of the product ( ) and the arrow on the base ( ) as shown in the image
on the below.
(2) Insert the base into the insertion opening on the display till it stops.
(3) Lightly tighten the 4 assembly screws
(4) Securely tighten the screws to fix.
(Tightening torque: 1.2 to 1.5 N•m)
16
to the base
with the assembly
at first to adjust the display so that it is level.
Insertion opening
Assembly screw
Assembly screw
Bracket
Base
(4)
(4)