Idiomas disponibles
Idiomas disponibles
with the household garbage.
DATE & TIME SET PROCEDURE
1. To adjust the date/time, press the Set button
The display will show a blinking number showing
the month.
2. Change the month by pressing the
Each press will increase the number by one in
a cycling manner. Press the Set button
to confirm the entry, and the screen will show
a blinking number representing the day of
the month.
3. Change the date and time as described in
Step 2 above, using the
numbers and the Set button
entries.
repeat process to set date and time
APPLYING THE CUFF
1. Remove all watches, wrist jewelry, etc. prior
to attaching the wrist monitor. Clothing
.
button.
again
button to change the
to confirm the
Press the
button
blinking month
increasing month
confirm the entry
15
sleeves should be rolled
up and the cuff should be
wrapped around bare skin
for
correct measurements.
2. Apply cuff to left wrist with
palm facing up as shown
in Fig. A.
3. Make sure the edge
of the cuff is about
1/4"~1/2" (1 cm) from the
palm as shown in Fig. B.
4. In order to insure accurate
measurements, fasten
the hook and loop strap
securely around your wrist
so there is no extra space
between the cuff and the
wrist as shown in Fig. C.
If the cuff is not wrapped
tight enough, the mea-
surement values will not
be accurate.
5. I f your physician has
Fig. A
Fig. B
Fig. C
Fig. D
16
