Parkside PMFS 200 C3 Traduccion Del Manual De Instrucciones Originale página 12

Working procedures
■ Switch the appliance on before applying it to
the workpiece.
■ Apply minimal pressure when working.
■ Work at a constant speed.
■ Change the sanding sheets regularly.
■ Never use the same sanding sheet for sanding
different materials (e.g. wood followed by
metal). Optimum sanding results can only be
achieved by using clean sanding sheets.
■ Clean the sanding sheet every once in a while
using a vacuum cleaner.
■ Sand hard-to-reach places with the front or side
edge of the sanding sheet on the sander plate.
■ Guide the sander over the workpiece in parallel
and use overlapping sanding motions.
■ After completing the task, lift the appliance from
the workpiece and then switch it off.
Maintenance and cleaning
WARNING!
► Always remove the plug from the mains
power socket before carrying out any work
on the appliance.
The multi-sander is maintenance-free.
■ Always clean the appliance directly after
completion of work.
■ Use a dry cloth to clean the housing.
■ Remove any sanding dust stuck to the appliance
with a brush.
■ Never use sharp objects, petrol, solvents or
cleaning agents which can damage plastic. Do
not allow any liquids to get into the interior of
the appliance.
■ Always keep the ventilation openings free of
obstructions.
│ GB │ IE
■ 8
Disposal
Applies only to France
The product, its packaging and the operating
instructions are recyclable. They are subject to an
extended manufacturer responsibility and will be
collected separately.
Do not dispose of power tools
in your normal domestic waste!
The adjacent symbol of a crossed-out
dustbin means that this appliance is
subject to Directive 2012/19/EU. This directive
states that this appliance may not be disposed of in
the normal household waste at the end of its useful
life, but must be taken to specially set-up collection
locations, recycling depots or disposal companies.
The disposal is free of charge for the user.
Protect the environment and dispose of this
appliance properly.
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling plant.
PMFS 200 C3