Idiomas disponibles
Idiomas disponibles
4.Method of Replacing Fuse
1
As shown in the picture, pull out the power plug from power socket. Remove
the safety socket from the power socket with a straight screwdriver. Take out
the fuse according to the direction shown, and insert it after replacing it.
Note: The fuse specification is 250V/10A, φ5*20mm
5.Strength Adjustment of Folding Handle
the hole, and turn it clockwise with the hexagonal wrench to tighten,
counterclockwise to loosen.
straight
2
screwdriver
insert position
The folding handle has been adjusted to
a slightly appropriate tension force
when the machine leaves the factory.
However, due to the strength of the
individual wrist, the user can adjust the
folding handle appropriately according
to their own preferences. It will cause
the shaking phenomenon if the gap
between the riser and the folded part is
too large. As shown in the steps in the
figure, pull out the round plug; combine
the hexagon wrench and socket wrench
into a labor-saving lever, insert the
hexagonal end of the socket wrench into
11
3
