Idiomas disponibles
Idiomas disponibles
3.Assembly Instruction
4
5
2
6
3
1
Put the main body on the carpet or cushion as shown in the picture after
taking out from packing carton.
As shown in step ①, open the folding handle in the direction shown,
meanwhile the lower end of the riser will naturally expand to the two sides.
As shown in step ②, raise the riser upward to the upper limit position.
As shown in step ③, press "folding handle" and lock the riser.
As shown in step ④, fix the "phone bracket" on the riser beam with two
"ST4.2×22 countersunk head bolts".
As shown in step ⑤, put the "safety lock" into the corresponding position.
As shown in step ⑥, insert the power cord into the power socket, and the
installation is complete.
There are 4 foot pads on the bottom of the machine that can be adjusted by
the user. The foot pads can be adjusted according to the unevenness of floor.
Make sure that the 4 foot pads and the two front casters are on the ground
before use. Otherwise it may cause unnecessary damage to the machine and
the user.
Note: Please check again whether all bolts are locked after the
assembly of this machine.
10
