Idiomas disponibles
Idiomas disponibles
Installation Instructions
OUTSIDE TOP EXHAUST
(Vertical Duct)
INSTALLATION
OVERVIEW
C1. Attach Mounting
Plate to Wall
C2. Prepare
Top Cabinet
C3. Adjust Blower
CA. Install Adapter
C5. Mount Oven
C6. Adjust Exhaust Adapter
C7. Connect
Ductwork
1
I-_
ATTACH THE MOUNTING
PLATE TO THE WALL
Attach
the plate to the wall using toggle bolts. At
least one wood screw must be used to attach the
plate to a wall stud.
[]
Remove the toggle wings from the bolts.
[]
g
Insert the bolts into the mounting
plate throu
h
the holes designated
to go into drywall and
reattach
the toggle wings to Y_"onto each bolt.
To use toggle
bolts:
Mounting
Plate.
SpacingforToggles
Mare ThanWall
-_.,--_Thickness
[eWings
BoltEnd
[]
Place the mounting
plate against the wall and
insert the toggle wings into the holes in the wall
to mount the plate.
NOTE: Before tightening
toggle bolts and wood
screw, make sure the tabs on the mounting
plate
touch the bottom
of the cabinet when pushed flush
against the wall and that the plate is properly
centered
under the cabinet.
CAUTION:
Be careful to avoid pinching
fingers
between
the back of the mounting
plate and the wall.
[_] Tighten
all bolts. Pull the plate away from the wall
to help tighten the bolts.
19
