Idiomas disponibles
Idiomas disponibles
Installation Instructions
I_
Gently
remove
the wires from
the grooves.
Reroute
the wires through
grooves on other side
of the blower
unit.
BeforeRerouting
After Beroudng
Wires RoutedThrough Right Side
Wires RoutedThroughleft Side
[_
Roll the blower
unit 90 ° so that fan blade openings
are facing out tile back of the oven.
BeforeRolling
Oven
Oven
[]
Place
the blower
unit back into
the opening.
EndA
CAUTION:
Do not pull or stretch
the blower
unit
wiring.
Make sure the wires are not pinched.
NOTE:
The blower unit exhaust
openings
should
match exhaust
openings
on rein"of ovep_
_]
Replace
the blower
in the
plate
posidon
same
as before with the screws.
, €. B'°B,
eorwPLT
ws
BeokofOven
[_
Insert
the tabs on each side of the damper
into
file holes at the inside
rear of the adapter.
_-_
Exhaust
Adapter
[_
Attach
the exhaust
adapter
to the rear
of the
oven
by sliding
it into
the guides
at the top center
of the back of tile oven.
ExhaustAdapter .,_
Slide exhaust _
adapterinto
guideson
oven rear.
I._
_
Damper
(hinge sideup)
_V
"_'_r_ Screws
Tabs
,
Guides
Push in securely until it is in the lower locking
tabs. Take care to assure the damper hinge is
installed
so that it is at the top and that the
damper
swings freely.
[_
Secure the exhaust adapter
to the oven with the
two bronze metal screws provided.
17
