Idiomas disponibles
Idiomas disponibles
Installation Instructions
MOUNT
THE OVEN
FOR
EASIER
INSTALLATION
AND PERSONAL
SAFETY, WE RECOMMEND
THAT TWO
PEOPLE
INSTALL
THIS
OVEN.
IMPORTANT:
Do not grip or use handle
during
installation.
NOTE: If your cabinet is metal, use tile nylon
grommet around the power cord hole to prevent
cutting of the cord.
NOTE: We recommend
using filler blocks if the
cabinet front hangs below the cabinet bottom shelf.
IMPORTANT:
If filler
blocks
are not
used,
case damage
may occur
from
over
tightening
screws.
NOTE: When
mounting
the oven, thread
power
cord through
hole in
bottom
of top cabinet.
Keep it tight throughout
Steps 1-3. Do not pinch
cord or lift oven by
p_flling cord.
l[_Lift
oven, tilt it
forward and hook slots
at back bottom edge
onto two lower tabs
of mounting
plate.
2]Rotate
front of oven up
against cabinet bottom.
[_]Insert
a serf-aligning screw through
top center cabinet
hole. Temporarily secure the oven by turning the
screw at least two full turns after the threads have
engaged. (It will be completely tightened
later.) Be
sure to keep power cord fight. Be careful not to pinch
the cord, espedally when mourning flush to bottom
of cabinet.
CabinetFront
CabinetBottomShelf
FillerBlock
I
quivalent
to Depth
of Cabinet
Recess
Self-AligningScrew
OvenTop
[_]Attachthe
oven to the top cabinet.
[]
Insert 2 self-aligning
screws
through outer top cabinet
holes. Turn two full turns on
each screw.
I
]Tighten
center
screw completely.
[]
Tighten
the outer two screws to the top of the
oven.
(While
tightening
screws, hold
the oven
in place
against
the wall and
the top cabinet.)
[_]Install
grease filters. See the Use & Care Guide
packed with the oven.
18
