TWINCA ES-500 Manual De Operaciones página 48

the pins in the scissors, if there is a need to lift the dump bed, remove the pins in the dump bed.
3. Remove the pins, lift the dump bed, and remove the hydraulic piston.
4. Move the dump bed and place it on a flat surface out of harm's way while the machine
is being serviced. At emergency remove the emergency reason from the machine.
5. At the end of the service the dump bed is lifted back into the machine and the
hydraulic piston is fitted.
6. Put the dump bed down on the chassis and remount the pins.
Check before starting and using the machine
If a error is detected do not use the machine until the error has been rectified.
• Check the machine for defects.
• Check all parts are present and work optimally.
• Check tire pressure. The correct tire pressure appears on the side of the tire. This is not to be done if the
machine is with solid tires. If in doubt, contact your dealer or Twinca A/S.
• Check power level. We do not recommend driving with the machine if battery levels are below 15%.
• Test emergency stop and belly button.
Maintenance after 20 hours of operation or 3 months
Maintenance after 20 hours of operation or after 3 months of use can be performed by the owner or operator.
• Lubricate lubrication points on the hydraulic cylinder.
• Lubricate lubrication points on the tilt point of the dump bed.
TWINCAES5008001-EN 44