TWINCA ES-500 Manual De Operaciones página 47

1. Use the machine's hydraulics to lift the dump bed and scissors, depending on the task to be solved.
2. Mount the supplied safety brackets.
3. Turn off the machine.
4. Service the machine.
5. Turn on the machine.
6. Remove the supplied safety brackets.
7. Ensure the lifting functions work properly.
It is recommended only to lift the dump bed manually if absolutely necessary. For normal maintenance use the
supplied safety bars. Be careful to lift the load manually, as this can potentially pose a risk of crushing.
WARNING: Danger of crushing and do not stand by the machine during use
Emergencies such as servicing the machine or pinching under scissors and dump bed in case it is without power or
otherwise cannot be activated. It is recommended, as far as possible, to use the machine's own functions to stop
the emergency. It is recommended to use Twinca special tools to avoid the potential risk of crushing.
WARNING: This procedure can aggravate the accident if it is not followed exactly! It is important that scissors
and dump bed are supported by a crane or other lifting unit. These parts are heavy and cannot be held up
without the use of lifting gear that can carry a minimum of 200 kg.
1. Make sure the machine is turned off and the accident stopped.
WARNING: If the pins are removed without the supporting, the scissors and dump bed will collapse.
2. Install Twinca special tool. Support scissors and load with a lifting unit.
WARNING: Remove only those pins that relate to what is to be lifted. If there is a need to lift scissors, remove
43 TWINCAES5008001-EN