Idiomas disponibles
Idiomas disponibles
Introduction
Thank you for choosing a Twinca Dumper. We hope the machine will help you work more efficiently and improve
your work environment.
This operations manual contains descriptions and illustrations that apply to all Twinca Dumpers ES models.
The illustrations in this operations manual are based on the drawings of the ES-800 and may be different from
your chosen model.
Twinca Dumper is intended for transport primarily of soil, granules, stones, concrete, wood and similar materials.
Instructions for use
Read the manual thoroughly. Place it in a safe place and always make it available to the operator.
For proper use and maintenance of the machine, the user must have read and understood the manual. The
Executive Order on the Working Environment Act must always be complied with. The operator of the machine
is responsible for accidents.
Before starting the machine
The owner is responsible for making sure the operator has read and understood the manual, so the machine is
used safely and in accordance with this manual. The operator must therefore have understood:
•
The safety instructions given in this manual and on the machine.
•
Emergency stop and its significance.
•
Operation of the machine.
•
Which work tasks the machine is intended for and which tasks the machine may not be used for.
•
Machine maintenance.
•
What procedures must be followed to prevent personal injury and damage to other equipment.
Modifications
If the owner wants modifications, this can be requested before production. These modifications are attached to
the standard documents of the machine.
The machine may not be modified without a written permission from Twinca A/S. If modifications are made
without a written permission from Twinca A/S will the owner be responsible for all modifications that are made
to the machine after delivery from Twinca A/S. The owner is responsible for implementing the modifications.
Modifications can pose new risks to the operator, the machine and the environment. It is the owner's responsibility
that modifications made to the machine live up to European standards and laws, or the standards and laws used
in the country of use of the machine.
TWINCAES5008001-EN
30
