Black and Decker BDERO100 Manual De Instrucciones página 3

Idiomas disponibles

Idiomas disponibles

power t ool i nunexpected
situations.
f) Dress properly. Do not wear loose
clothing
or jewelry. Keep your hair,
clothing
and gloves away from
moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
g) If devices are provided
for the
connection
of dust extraction
and
collection facilities,
ensure these
are connected
and properly used.
Use of dust collection can reduce
dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use
the correct
power tool for your
application.
The correct power tool
will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the
switch
does not turn it on and
off. Any power tool that cannot be
controlled with the switch is dangerous
and must be repaired.
c) Disconnect
the plug from the
power source and/or the battery
pack from the power tool before
making any adjustments,
changing
accessories,
or storing power tools.
Such preventive safety measures
reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or
these instructions to operate the
power tool. Power tools are dangerous
in the hands of untrained users.
e) Maintain power tools. Check for
misalignment
or binding of moving
parts, breakage of parts and any
other condition
that may affect the
power tool's operation,
if damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting
tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories
and tool bits, etc. in accordance
with these instructions, taking into
account
the working
conditions
and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
5) SERVICE
a) Have your power tool serviced
by a
qualified
repair person using only
identical replacement
parts. This will
ensure that the safety of the power
tool is maintained.
_SAFETY
WARNINGS
AND
iNSTRUCTiONS:
SANDERS
• ALWAYS WEAR EYE PROTECTION.
• Clean your tool out periodically.
z_WARNING:
Some dust created by
power sanding,
sawing, grinding,
drilling,
and other construction
activities
contains
chemicals
known to the State
of California to cause cancer, birth
defects or other reproductive
harm.
Some examples
of these chemicals
are:
• bead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a welt ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
• Avoid prolonged contact with dust
from power sanding,
sawing, grinding,
drilling,
and other construction
activities.
Wear protective clothing
and wash exposed
areas with soap
and water. Allowing dust to get into
your mouth, eyes, or lay on the skin may
promote absorption of harmful chemicals.
z_CAUTION: Wear appropriate
hearing
protection during use. Under some condi-
tions and duration of use, noise from this
product may contribute
to hearing loss.
OTHER
iMPORTANT
SAFETY
WARNINGS
AND iNSTRUCTiONS
EXTENSION CORDS
When using an extension cord, be sure to
use one heavy enough to carry the current
your product will draw. An undersized cord
will cause a drop in line voltage resulting
in toss of power and overheating. The
following table shows the correct size
to use depending on cord length and
nameplate ampere rating. If in doubt, use
the next heavier gage. The smaller the
gage number, the heavier the cord.
Minimum Gage for Cord Sets
Volts
Total Length
of Cord in Feet
120V
0-25
26-50
51-100
101-150
240V
0-50
51-100
101-200
201-300
AmpereRating
More
Not more
American
Wire Gage
Than
Than
-
6
18
16
16
14
10
18
16
14
12
10
12
16
16
14
12
12
-
16
14
12
Not Recommended
loading