Idiomas disponibles
Idiomas disponibles
RUBBER DRAIN HOSE ADAPTOR
MOUNTING BRACKETS
For a large port, use the drain hose as it is.
Before installing the supplied countertop mounting brackets,
decide which method of securing the dishwasher into its
enclosure will be used. Once the mounting brackets are
installed on the dishwasher, removing them is difficult and
will damage the mounting brackets and the dishwasher.
For a smail port, insert the rubber drain hose adaptor into
the drain hose end as shown below.
1.
Obtain the Rubber Drain Hose Adaptor screw clamp
from the Dishwasher Installation Kit (de nof substitute).
2.
Insert the dishwasher drain hose into the end of the drain
hose. Be sure to fully insert the drain hose.
3.
Use the clamp provided to attach the Rubber Drain
The dishwasher can be secured into its enclosure in two ways:
Hose Adaptor to the house plumbing. Tighten until hose
1.
Top Mount is used for countertops made of wood
can no longer rotate.
or other materials that can easily drilled. Orient the
~
mounting
brackets as shown below and position the
|
the mounting brackets over the slots on the dishwasher's
front corners. Push the mounting brackets down firmly to
insert the tabs into the slots.
Drain Hose
<{ttItmmmms-
Rubber drain
hose adaptor
Top Mount
2.
Side Mount is used for countertops made of marble,
granite, or other very hard materials that cannot be
easily drilled. Bend the mounting brackets
along the
smail holes and in the same direction as the two small
tabs. Orient the mounting brackets as shown below, and
position the two small tabs on the mounting brackets
over the two slots on the dishwasher's front corners.
Push the mounting brackets down firmly to insert the
tabs into the slots.
Side Mount
AY
WARNING
Do not use the dishwasher until it is completely installed.
When opening the door on an uninstalled dishwasher,
carefully open the door while supporting the rear of the
unit. Failure to follow this warning can result in serious
injury.
