Kenmore 596.57002600 Guía De Uso Y Cuidado página 20

Ocultar thumbs Ver también para 596.57002600:
Idiomas disponibles

Idiomas disponibles

Iceand Water
Dispenser Lock
The Dispenser Lock prevents ice or water from
...........
being dispensed.
"_-_
To Lock Dispenser:
• Press and hold the Lock button for three (3)
seconds. A green indicator
light above the button will
illuminate
when the dispenser is locked.
To Unlock Dispenser:
• Press and hold the Lock button for three (3)
seconds. The green indicator light above button will
go out.
Water Filter Status Indicator
Light
o
Water
Filter
(select
models)
• oK
Change
The Water Filter Status Indicator
Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition.
A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function
is reset.
=
To Reset Indicator:
,_,Look_.
• Press and hold both the Lock and Water
buttons simultaneously
for four (4} seconds.
The green filter status indicator
light will flash ('w_t_
three times when the function
has
successfully
reset.
Auto Light
(Models
with Water
Filter
Status
Indicator
Light
on Dispenser)
The Auto Light function
activates the dispenser
light at half-power
when the Light Sensor detects that
the light levels in room are low.
To Activate
Auto Light:
• Press Auto Light button. A green indicator
light
above button illuminates
when the sensor is active.
To Deactivate
Auto Light:
• Press Auto Light button. The green indicator
light
will go out.
Note:
The dispenser light will operate when Auto
Light is ON or OFE
Light
Press the Light pad once to select the Auto Light
function
which activates the dispenser light at half-
power when the light sensor detects that the light
levels in room are low. The Auto indicator
light will
illuminate.
To Activate
Light:
• Press the Light pad again to turn the dispenser light
on continuously.
The On indicator
light will
illuminate.
To Deactivate
Light:
• Press the Light pad a thirdtime
to turn the dispenser
light off.
Sabbath
Mode
(Models
with Water Filter
Status Indicator
Light on Dispenser)
When activated, the Sabbath Mode deactivates
the
control lights while leaving the control operational.
o
To Activate
Sabbath
Mode:
• Press and hold the Lock and Auto Light
..............
buttons simultaneously
for three (3) to four (4)
seconds. After three to four seconds, the
dispenser lights will turn off.
_Auto_
To Deactivate
Sabbath
Mode:
• Press and hold both the Lock and Auto Light
buttons simultaneously
for three (3) to four (/4)
seconds. After three to four seconds, the dispenser
lights will activate.
Notes:
• Dispenser
light will not activate during dispensing
while in this mode.
• If the power fails, the control will remain in
Sabbath Mode when power returns.
• Advanced Temperature
Control models: see User
Preferences page 14.
20
loading