Idiomas disponibles
Idiomas disponibles
Always wear protective gloves or a barbecue mitt
when handling hot components or items such as
pots.
LEAK TESTS
IMPORTANT – PERFORM LEAK TESTS BEFORE USE
Always leak test the unit – annually, when dismantled,
when parts are replaced, or if the gas cylinder is
removed or replaced.
•
Never use an open flame to check for leaks at
anytime. DO NOT IGNITE THE BARBECUE DURING
LEAK TESTING.
•
To be performed in a well-ventilated area.
•
Be sure all control knobs are in the 'OFF' position.
•
Check for leaks by brushing a solution of 1/2
water and 1/2 soap over all the gas system joints,
including all valve connections, hose connections
and regulator connections.
•
Ensure the soap solution has been applied to
all connections – connect the regulator to the
gas cylinder, open the gas control valve on the
regulator allowing gas to flow.
•
OBSERVE – if bubbles form over any part of the
joints there is a leak.
•
Turn off the gas and tighten all joints
•
Repeat test. If bubbles form again, do not use
the barbecue. Please contact your local dealer for
assistance.
GAS AND REGULATOR INSTRUCTIONS
•
The cylinder should be positioned underneath the
main barbecue body and stored upright.
•
Gas cylinders should never be stored or laid on
their side.
User Instructions
Before assembling your barbecue, remove all
protective packaging from each part.
The gas cylinder must have a connection compatible
with the regulator supplied with the barbecue and
have a minimum capacity of 4kg / 9lbs.
Do not store a spare LP gas cylinder under or near this
appliance.
Never fill the cylinder beyond 80% full. Failure to follow
these instructions exactly may result in fire causing
serious injury or death.
Place dust cap on cylinder valve outlet whenever the
cylinder is not in use. Only install the type of dust cap
on the cylinder valve outlet that is provided with the
cylinder valve. Other types of caps or plugs may result
in leakage of propane.
Connecting to the Cylinder
•
Confirm all barbecue control knobs are in the 'OFF'
position.
•
Connect the regulator to the gas cylinder, hand
tighten it securely (*) and proceed according to
instructions below and the instructions from the
gas cylinder supplier.
Cylinders used in USA or Canada
•
Are only acceptable for use with the appliance
provided they are compatible with appliance gas
cylinder retention means. See illustration within
this user manual depicting correct gas cylinder
retention.
•
Must be constructed and marked in accordance
with Specifications for LP Gas Cylinders of the US
Dept of Transportation or the National Standard
of Canada CAN/CSA-B339, cylinders, spheres and
tubes for Transportation of dangerous goods.
•
Cylinders must have a listed overfilling prevention
device.
•
Cylinder used must have a collar to protect the
cylinder valve.
•
Must be a 20lb (9kg) cylinder LPG capacity 4.7
gallons (17.8 litres). Cylinder dimensions: Height
17.75 inches (451mm) and width 12.25 inches
(311mm).
BEFORE USING THIS APPLIANCE
1. Please read all of these instructions and appliance
owners manual prior to installation and use.
2. FOR OUTDOOR USE ONLY!
•
Appliance and tank must be in open, well ventilated
outdoor area prior to connection and use. Make
sure tank valve is fully closed and not leaking prior
to moving or connecting.
•
NEVER USE IN A GARAGE OR UNDER OVERHANGS!
•
NEVER STORE A SPARE CYLINDER OR ANY
FLAMMABLE LIQUID OR GAS UNDER OR NEAR THIS
APPLIANCE OR ANY OTHER HEAT SOURCE.
3. Be sure tank valve and regulator are proper mating
types, with correct threads or fittings, see manual.
4. Inspect tank valve, regulator, hose and fittings to be
sure they are clean, free of dirt, debris, not plugged
and not damaged. If damaged replace before use. See
local LP dealer for repairs.
5. Prior to connection, turn all control valves to the OFF
position.
6. Connect regulator to tank valve according to
appliance owners manual. Handle cylinder with care -
the contents are under high pressure.
7
