Idiomas disponibles
Idiomas disponibles
please read carefully the Assembly Instructions and/
or the User Instruction section of this manual before
contacting us.
Inspect the hose before each use of the outdoor
cooking gas appliance. If it is evident there is excessive
abrasion or wear, or the hose is cut, it must be
replaced prior to the outdoor cooking gas appliance
being put into operation. The replacement hose
assembly shall be that specified by the manufacturer.
See figures below showing the correct burner
installation with respect to the burner orifice.
TROUBLESHOOTING
PROBLEM
Burner will not light using the
ignition system
Low flame or flashback (fire in
burner tube - a hissing or roaring
noise may be heard)
Gas valve knob difficult to turn
POSSIBLE CAUSE
LP gas cylinder is empty
Faulty regulator
Obstructions in burner
Obstructions in gas jets or gas
hose
Electrode wire is loose
Electrode or wire is damaged
LP gas cylinder too small
Obstructions in burner
Obstructions in gas jets or gas
Windy conditions
Gas valve jammed
SOLUTION
Replace with full cylinder
Have regulator checked or replace
Clean burner
Clean jets and gas hose
Reconnect wire
Change electrode and wire
Use larger cylinder
Clean burner
Clean jets and gas hose
Use BBQ in a more sheltered
position
Replace gas valve
11
