Parkside PWP 90 B2 Traduccion Del Manual De Instrucciones Originale página 36

GB MT
Safety measures for the protection
of the operator are to be determi-
ned that are based on an estimate
of the actual exposure under the
real operating conditions (for this,
all parts of the operating cycle are
to be taken into account, for examp-
le, times in which the electric tool is
turned off, and those during which
it is turned on but running without a
load).
Notes on safety
Caution! When using power tools,
observe the following basic safety
measures for the prevention of elec-
tric shocks and the risk of injury and
fire.
Please read all these instructions be-
fore using this electric tool and please
keep the safety instructions.
Symbols and icons
Symbols on the device:
Warning!
Read the manual!
Remove the plug from the mains. Im-
mediately if the cable is damaged or
cut..
Do not expose the unit to rain.
Wear eye protection
Wear breathing protection
Safety class II
36
Electrical machines do not belong
with domestic waste
Symbols used in the instructions:
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preventi-
on of harm / damage.
Notice symbol with information on
how to handle the device properly.
General Safety Directions for
Power Tools
WARNING! READ ALL SAFETY
DIRECTIONS AND INSTRUC-
TIONS. Omissions in the compliance
with safety directions and instructions
can cause electrical shock, fire and/
or severe injuries.
Retain all safety directions and inst-
ructions for future use.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool).
Work area safety :
• Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
• Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools