Goodyear GY 2300I Manual De Instrucciones página 28

English
Owner´s manual
•
Cold start
Do not connect any electrical equipment before starting the genera-
tor.
1. Make sure that the fuel tank opening switch is in the ON position.
2. Set the roulette of the starting switch to the Choke position (if the
generator has been recently started and is still hot, it can be set to the
ON position directly).
Pull the starter choke until the combustion sound is continuous.
WARNING: After starting the engine, the handle must be
released carefully to avoid personal injury and damage to the
equipment itself due to rebound.
4. Turn the roulette of the ignition switch to the ON position within 5
seconds after the first combustion.
ATTENTION: If it does not start, check oil and/or fuel level.
5. GENERATOR USE
Grounding
Always have the unit grounded to avoid possible electrocution.
DANGER: Electrocution hazard. Failure to ground the generator can cause a shock and electrocute
you.
Overload protection
The generator will automatically shut down in the event of an overload. Check the operating and overload
indicators to get a more accurate diagnosis of what is happening to the equipment. Go to page 25.
28