Idiomas disponibles
Idiomas disponibles
USE AND OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
TIMER CONTROL
The Timer is adjustable between 1 - 24 hours.
AUTO TURN OFF:
While unit is running, press the Timer button
flashing, press the
automatically.
AUTO TURN ON:
When unit is in standby mode (when plugged in the power light will illuminate for a few seconds then
turn off), press the Timer button
press the
or
button to select the number of hours until you want the unit to turn ON
automatically.
SLEEP MODE
When the Sleep Mode is activated in Air Conditioning mode, the set temperature will increase by 1°C
or 1°F after the first hour of cooling and will increase a further 1°C or 1°F after the second hour of
cooling. The unit will maintain this temperature for 5 hours. The set temperature will then reduce by
1°C or 1°F on the seventh hour and reduce a further 1°C or 1°F on the tenth hour. Sleep mode will
then deactivate automatically.
Note: The Sleep Mode can be deactivated during cooling mode by pressing any button at any time.
WATER FULL ALARM
Condensation may accumulate in the unit.
If the internal tank is full, error code "P1" will be displayed and an alarm will beep for 3 seconds.
The unit will not operate until the water has been drained from the lower drain plug (refer to Water
Condensation Drainage).
After switching the Portable Air Conditioner off, the compressor will not start immediately. You
must wait about 4 minutes before it switches back on again.
WI-FI MODE^
When the Smart Portable Air Conditioner is connected to the Wi-Fi function, the
will be illuminated.
^THIS IS ONLY FOR MODEL HF8CESVWK5/ HF0CESVWK6R / HF2CESVWK8
WITH WI-FI SMART FEATURES
or
button to select the number of hours you want the unit to turn OFF
and the display will flash. While the display is flashing,
and the display will flash. While the display is
EN
10
indicator light
