Use & Operation; Control Panel; Function Buttons - Honeywell CL401PM Manual De Usuario

USE & OPERATION

CONTROL PANEL

FUNCTION BUTTONS

SPEED / ON - OFF (VELOCIDAD / ENC - APAG)
Connect to the power supply and turn the SPEED knob. The fan will start. Change the speed from 3 to
1 (1 for Low, 2 for Medium and 3 for High fan speed). To switch OFF the unit, turn the SPEED knob to 0.
COOL (FRÍO)
You must add water before operating the unit on Cool mode. Turn the COOL knob to the ON position to
activate evaporative cooling. The water pump will operate and you will feel the cooler air after the
Honeycomb Cooling Media is completely wet.
SWING (OSCILADOR)
Turn the SWING knob to the ON position to activate the movement of the louvers. The louvers will begin
to move left to right automatically. Vertical Air Flow - You can manually adjust the lever located at the
front of the unit to change vertical air flow.
COOLER LOCATION
Make sure to position the air cooler correctly before you set up and start using the product. Please
refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide.
APAG
FRÍO VELOCIDAD
EN
0
APAG
OSCILADOR
2