GE JVM 1490 Manual Del Propietário página 30

Ocultar thumbs Ver también para JVM 1490:
Idiomas disponibles

Idiomas disponibles

Before you call for service...
Troubleshooting -tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Oven will not start
What To Do
• Replace fuse or reset circuit
breaker:
Possible
Causes
A fuse in your home may be
blown or the circuit breaker
tripped.
Power
surge.
• Unl)lug tile microwave
oven, then plug it back in.
Plug not fully inserted
into wall
• Make St/l'e the 3-l)roug
l)lug on the oven ix fidlv inserted
outlet,
into wall outlet.
Door not securely
dosed.
• Open
the door :rod close securely.
Controlpanel
lighted,
Door
not securely
closed.
• OI)eu the door :rod close securely.
yet oven will not start
STARTbutIon not pressed after
• Press START
entering
cooking
selection.
Another
selection
entered
• Press CLEAR/OFE
already in oven and CLEAR/OFF
button
not pressed
to cancel it.
Cooking thne not entered
after
• Make sure you have entered
cooking
time after pressing
pressing
77ME COOK
77ME COOK
CLEAR/OFFwas pressed
• Reset cooking
program
:rod press START
accidentally.
Food weight not entered
after
• Make sure vott have entered
food weight after selecting
selecting
AUTO DEFROSTer
AUTO DEFROSTor FAST DEFROST
FAST DEFROST
Food type not entered
after
• Make sure you have entered
a food type.
pressing
AUTO COOK
CONTROL LOCKED
The control has been locked.
• Press and hold CLEAR/OFFti)r about 3 secouds
appears on display
to uuh)ck the control.
CAUTION--OVENHOT
The temperature
hasJde the
• This is hernial.
appears on display
oven is greater than 200°E
One of the se_lsor cooldng
• These teatul'es
will not operate
when
the oven ix hot.
pads was pressed
Maen the
temperature
inside the oven
was greater
than 200°E
Floor of the oven is warm
The cooktop
fight is located
• This ix n(mnal.
even when the oven has
below
the oven floor. When
not been used
fight is on, the heat it produces
may make the oven floor get warm.
You hearan unusual
You have tried
to
change
• M:mv oI the oven's features
are preset
:rod
low-tone beep
the power level when it is
cannot
be clmnged.
not allowed.
Oven emits a smoky odor
Oils on the stainless
steel cavity
• This ix n(mnal.
and gray smoke after
are bunm_g off after ush_g the
using the Bake feature
Bake feature
the first few times.
3O
loading