GE JVM 1490 Manual Del Propietário página 27

www.GEAppliances.com
Stainless Steel
Do not use a steel-wool pad; it will scratch
the surface.
To clean stainless steel surthces, use a hot,
damp cloth with a mild detergent suitable
fin" stainless steel surfi_ces. Use a clean, hot,
damp cloth to reinove soap. Dry with a ch T,
clean cloth.
If fi)od soil remains tr_ a general
kitchen cleane_:
For hard-to-clean soil, use a standard
stainles_steel cleane_; such as gon-Mni _'
or Cameo?
Apply cleaner with a damp sponge. Use a
clean, hot, damp cloth to remove cleane_:
Dry with a dry, clean cloth. Mwa}:s scrub
lightly in the direction of the grain.
Mier cleaning, use a stainless-steel polish,
such as Stainless Steel Magic_ _ Revere
(_oi_per and Stainless Steel CleaneK)or
_,Venol M1 Puq)ose Metal PolishF Follow
the product instructions fin" cleaning the
stainles_steel stm'hce.
Replacing the light bulb.
Remove screw.
Cooktop Light/Nite Light
Replace wi_ a 20 watt (max.) halogen bulb.
Order WB36X10176 from your GEsupplier.
_To replace the cooktop light/nite light,
fi_t disconnect the power at the main
flJse or circuit breaker panel, or pull
the plug.
_'_ Remoxe the screw fl'om the side of the
light compartment coxer and lower the
cover until it stops.
_ge sure the bull) is cool befin'e
remoxin * Break the adhesixe seal
by genfl} unscrewing the bulb.
D Screw in the new bulb, then raise the
light coxer and replace the screw.
Connect electrical power to the oxen.
27