Idiomas disponibles
Idiomas disponibles
GB
MT
Proper use
This power tool is intended to function as
a grinder, sander, wire brush, polisher,
carving or cut-off tool.
Only operate in dry areas.
The device is intended for use by adults.
Children under the age of 16 may not use
the device, except under supervision.
Any other use that is not expressly permit-
ted in this instruction manual may pose
a serious hazard to the user and result in
damage to the device. The operator or
user of the machine is responsible for any
accidents or personal injury and/or mater-
ial damage to third parties or their prop-
erty. The machine is intended to be used
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
The device is part of the X 12 V TEAM
series and can be operated with bat-
teries of the X 12 V TEAM series. Bat-
teries of the X 12 V TEAM series may
only be charged using chargers of the
X 12 V TEAM series.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Cordless Rotary Tool
• Guard cover, Sanding table, Parallel
guide, Circle cutter, Milling attachment,
Auxiliary handle
• Accessories
22×Cutting disc+Mandrel (cutting
disc), 14×Sandpaper+Mandrel (grind-
ing disc), 8×Grinding belt+Mandrel
(abrasive belt), 2×Milling pin, Co-
28
rundum mounted point, Silicon carbide
mounted point, Grinding disc, 2×Pol-
ishing sander, 3×Felt polishing disc
(large), 3×Felt polishing disc (small),
Mandrel (polishing disc), Plastic brush,
Spiral milling pin, Milling cutter pin,
HSS drill, Mounting key, Polishing com-
pound
• Storage case
• Translation of the original instructions
• Rechargeable battery and charger with
instruction manual
Overview
The illustrations for the
device can be found on
the front and back fold-out
page.
1 Clamping nut
2 Collet chuck
3 Screw cap
4 Spindle lock
5 On/Off switch
6 Handle
7 Charge level indicator on the tool
8 Speed display
9 Speed button
10 Suspension system
11 Direction of rotation arrow
12 Auxiliary handle
13 Milling attachment
14 Sanding table
15 Scale
16 Parallel guide
17 Guard cover
18 Battery
19 Battery release
20 Battery charger
21 Storage case
22 HSS drill
23 Mandrel (polishing disc)
