Special Accessories; Operation; Switching On; Switching Off - Gaggenau VL 040 715 Manual De Instrucciones

Special accessories

You can order the following accessories from your
specialist dealer:
AD 724 040 Connection piece for round duct DN
125 mm
For side connection to VL, additional
adapter plate AD 724 041 is required
AD 724 041 Adapter plate for side connection from
AD 724 040 to VL
AS 070 001 Connection piece for extending when
installing beside VK or VF
LS 041 001 Air conduction rail for VL 040/041
beside gas appliance
VV 200 014 Connection strip made of stainless
steel, for combining with other Vario
appliances
VV 200 034 Connection strip made of aluminum, for
combining with other Vario appliances
Use the accessories only as indicated. The
manufacturer assumes no liability for incorrect usage of
the accessories.

Operation

Thoroughly clean the appliance and accessories prior to
initial use.
Note: VL 040 can only be operated in combination with VL 041. All operating indications apply to both
downdraft ventilators. That is: If you set the control knob
to level 1, both downdraft ventilators are set to level 1.

Switching on

Switching off

Ventilation molding

If the downdraft ventilation is operated next to a gas
appliance, an air conduction rail LS 041 001 must be
attached when cooking. The air conduction rail
improves the intake behavior of gas appliances. The air
conduction rail prevents the putting out of small flames
due to drafts.
Turn the control knob right to
the desired position (0-4).
Turn the control knob left to
the 0 position.
11